When you need to tow a car, using a tow strap is the best way to do it. You might need to tow a car if it has broken down and you can’t fix it, or if you need to move it to another location. 

Whatever the reason, it’s important to know how to use a tow strap properly so that your car can be towed safely.

A tow strap is the best way to tow a car. Here’s how to use one properly so that your car can be towed safely.

What is a Tow Strap?

A tow strap is a heavy-duty piece of fabric or webbing that is used to secure one vehicle to another. It is typically made from polyester or nylon and can have a maximum capacity of up to 20,000 pounds. 

They are often used in conjunction with a tow bar, which is a metal bar that is attached to the front or back of a vehicle. 

When using a tow strap, it is important to ensure that the strap is properly secured and that there is no slack in the line. Otherwise, the strap could come loose and cause an accident. 

Tow straps are an essential piece of equipment for any motorist who may need to tow another vehicle, and they can be purchased at most auto parts stores.

How to Use a Tow Strap

A tow strap is a useful tool for anyone who frequently hits the open road. Whether you’re an avid camper or a weekend warrior, a tow strap can come in handy when you need to tow a vehicle or trailer. 

Here’s how to use one:

First, make sure that both vehicles are parked on level ground and that the engines are off. 

Next, secure one end of the tow strap to the front of the vehicle that will be doing the towing. The other end of the strap should be attached to the back of the vehicle that will be towed. 

Once both ends are securely fastened, start the engine of the towing vehicle and begin driving slowly. Remember to maintain a safe distance between the two vehicles; a good rule of thumb is to keep about 10 feet between them.

If either vehicle starts to veer off course, gently apply the brakes. Finally, when you reach your destination, remove the tow strap and store it safely for future use.

With these tips in mind, you’ll be able to use a tow strap with confidence the next time you need it.

Tips For Using a Tow Strap

A tow strap is a useful tool for any driver, whether you’re stuck on the side of the road or you’re looking to help a friend in need. 

But while a tow strap can be a lifesaver, it’s important to use it correctly to avoid damaging your vehicle. 

Here are a few tips to keep in mind when using a tow strap:

First, always attach the tow strap to the frame of the vehicle that you’re escalating, not to the bumper. This will help prevent damage to the bumper or even dislodging it entirely. 

Second, be careful not to exceed the capacity of the tow strap. Most straps have a maximum weight limit that shouldn’t be exceeded, as this can cause the strap to break. 

Finally, make sure both vehicles are in park and set the parking brakes before attaching the tow strap. 

Once you’ve followed these steps, you’ll be able to use your tow strap with confidence, knowing that you’re doing so safely.

The Bottom Line

When you’re using a tow strap, be sure to drive slowly and carefully, and avoid making sudden stops or turns. If you follow these tips, you’ll be able to safely tow your car with a tow strap.